Company Profile Certificate Partnership Download Contact Us Home
Technology

Coil Options
Normally Closed
Normally Open
MK-series
LCU
MCU
RS SERIES
New Product
Other Control Valves
Other Control Valves  
Manu broad
Page1 Page2 Page3

Page4
L STYLE WATER HAMMER ARRESTER
  • The flow-directing mechanism in the valve can guide the flow and stabilize pressure.
  • In the corner of pipe, the water hammer is the most
    obvious. The design is for meeting the requirement
    and set the arrester at the corner directly. This design
    not only saves the space and is easy to set up, but also can replace the traditional crooked head to reduce the cost of setting up.
  • L style absorbs water hammer effect in two ways and
    brings excellent result.

TOP
DIRECT-ACTIVATED PRESSURE REDUCING VALVE
( Bronze / Thread Type )

Heater is theeasiest water-hammer-effect
creator at home. The major reason is heater
has complicated piping system inside and
will casue unstable pressure impact when
turn on and turn off. The situation can
be improve by installing angle valve style
water hammer awwester at the inlet
of cause water hammer effect,
is also easy to cause water hammer eddect,
which can be improved by installing
angle style arrester at the outlet of the heater
to prevent the vibration and noise.

At present, the fast turn-off
faucet is applied at most
of the household and it is
easy to cause water hammer
effect, which will cause noise
and affect the environment
quality.
Install the angle valve style
water hammer arrester at the
inlet of the faucet can improve
the situation.		 When the water level in the closet of the
close of the commode is approaching the
full level, the float ball will fluctuate
and hinder the water flow.
Moreover ,it will creat a serial of pressure
wave and cause vibration
and noise. Install the angle valve style
water hammer arrester at the inlet
of teh water closet can improve the
situation.

TOP
I STYLE WATER HAMMER ARRESTER
  • Can be installed at vertical, horizontal or upside-down
  • If the fluid is acid / alkaline or oil, the air bag made of
    dpecial material should be applied.
  • Vertical, horizontal and upside-down installation is acceptable
  • Please cantact us for special fluid and temperature
  • Normal air chamber pressure : 2.5kgf/cm2
  • Diaphragm material :NBR
TOP
PRESSURE REDUCING VALVE SET
  • Module assembly, which means light structure,
    space-saving, easy installation and maintenance.
  • Equipped with buffer check valve, unfavorable effect
    from water impulse can be eliminated.
  • Simple structure, precise tuning and easy operation.
  • Module assembly can decrease leakage coming from
    assembly connections due to long-term vibration.

TOP
 

 

 

KUHNWAY CORPORATION
Add: 2F, No. 84, Sec. 3, Jianguo N.Rd., Taipei 104, Taiwan.
TEL:886-2-25158905~6       FAX:886-2-25096364
E-mail:kuhnway@ms15.hinet.net